Honda 400ex vacuum lines3/14/2023 If you want an easy way to get the screws out, here's how I do it - I have a collection of left hand twist drill bits - I use a bit slightly larger than the shank of the screw - for a 4mm screw I use a 3/16 drill bit - as the head of screw is drilled off the shank, sometimes th bit will "catch" and back the screw out of the hole - if that doesn't happen, once the head of the screw is off the shank, simply remove the float bowl then remove the shank of the screw from the carb body - usually you can spin it out with your fingers - put a new "proper" screw back in when you are doneīackfiring on deceleration is usually caused by a decrease in back pressure when a "performance" exhaust is installed or the OEM muffler has been modified for less back pressure. If it's overflowing, it is a problem that is going to require the float bowl be removed. No - those tubes let air in and out of the float bowl so the fuel level can rise and fall.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |